Read more on Bloomberg

Read more on AM Online

Read more on The Economic Times

Read more on Japan Today

Read more on KLue

Read more on KLue

Read more on Edmunds Inside Line

These maintenance procedures include having a professionally trained and highly skilled automotive mechanic do diagnostic inspection on the vehicle’s battery, charging, starting, ignition, engine, power train control, fuel and emissions. Of course, the brakes and transmission system should be regularly checked, too.

One of the most basic things you should do is to learn your vehicle’s owner’s manual from cover to cover. Make sure you take note of the recommended schedules and frequency of checks and replacements. Also use it to learn everything you could about your vehicle, including all operations. Make sure you know how to read all instruments and indicator lights.

Have your vehicle engine tuned regularly by your automotive mechanic, following the schedules recommended in your owner’s manual. Also follow the recommendations in the owner’s manual in replacing fluids and parts such as filters. This will make your vehicle more efficient in using fuel. Something like a misfiring spark plug, on the other hand, can reduce your vehicle’s fuel efficiency by up to 30 percent.

Have your tires regularly checked by your automotive mechanic and do the proper maintenance procedures to make them last longer and save on resources. If your tires are under inflated, your engine will have to work harder and use more fuel. Misaligned wheels are also harder for the engine to control and use up more gas.

Even your vehicle air conditioner needs proper maintenance from a qualified automotive mechanic in order to prevent frequent auto AC repair. If your air conditioner needs repair, though, you should never put off auto AC repair because leaks release CFC gases that have been identified as contributory to the damage in the ozone layer. CFC gases are also released during improper auto AC repair procedures, though, so your choice of automotive mechanic is crucial.

Let your automotive mechanic and auto service know that you are concerned about the environment and monitor how they dispose of old batteries, motor oil, anti-freeze, coolant and tires. These should never be thrown on the ground or into open waterways. Learn about the proper recycling sites for these items through your local government authorities.

Drive properly. This includes driving within speed limits because driving above 55 miles per hour decreases fuel mileage significantly. Speed is alsoProper automotive maintenance is necessary to extend the life of your vehicle. According to a study done by ASE-certified Master Auto Technicians, keeping the vehicle properly maintained and operating it properly will make it last 50 percent longer. This will also enable it to function more efficiently and safely, making it more environmentally safe. Furthermore, it will decrease the frequency of your need for car repair. The auto service, Scott’s Automotive, Inc., therefore, gives tips on automotive maintenance procedures for environmental safety on its website as a public service.

These maintenance procedures include having a professionally trained and highly skilled automotive mechanic do diagnostic inspection on the vehicle’s battery, charging, starting, ignition, engine, power train control, fuel and emissions. Of course, the brakes and transmission system should be regularly checked, too.

One of the most basic things you should do is to learn your vehicle’s owner’s manual from cover to cover. Make sure you take note of the recommended schedules and frequency of checks and replacements. Also use it to learn everything you could about your vehicle, including all operations. Make sure you know how to read all instruments and indicator lights.

Have your vehicle engine tuned regularly by your automotive mechanic, following the schedules recommended in your owner’s manu best kept steady, avoiding jerky stops-and-gos which can cause overheating. Another factor that contributes to overheating and guzzles up fuel is load. Avoid heavy loads on your vehicle by eliminating excess stuff. Items you really need to have with you.should be stored in the trunk instead of the roof. This reduces air drag and decreases the demand on the engine, too.

In addition to proper vehicle maintenance, you should also plan the use of your vehicle. Less use means less wear and tear on the vehicle and less use of fuel.

As a vehicle owner, it is your responsibility to make your vehicle environmentally safe. If you follow the aforementioned tips given by an auto service on automotive maintenance procedures for environmental safety on its website as a public service, you will not only make your vehicle more environmentally safe but also give it a longer life while saving on car repair.
More on articlesbase[dot]com/automotive-articles/auto-service-gives-tips-on-automotive-maintenance-procedures-for-environmental-safety-1720634.html

According to traffic accident analysis, two thirds of car crush accidents are happening in front of cars; therefore, front air bag system is more broadly applied.

In order to have better performance, air bag design, development and manufacture are all very important. The contents are as follows:

1. Automotive Air Bag Permeation Testing

The material of automotive air bag is a laminated film of rubber and nylon. Air bag is filled with helium when working.

The rapid filling of air bag is of great importance. It is a must for the passenger to be stopped by the fast filled bag which can also exhaust promptly. Therefore, excellent and proper permeation performance of air bag is very important.

Labthink DM 2/330 Differential and Equal Pressure Method Gas Permeability Tester can test film and laminated materials including air bag laminated material. This tester can execute differential pressure and equal pressure in the same chamber. Three specimens can be tested simultaneously in 3 chambers. Poisonous, explosive and other gases can be tested as well. The temperature control range is 5C-95C, which is very convenient to test the permeability performance of airbag during storage and when triggered by heat.

2. Automotive Air Bag Smoothness and Open Easiness Tests

Good smoothness and open easiness of automotive air bag are vital to backup air bags and quick reaction when the passenger is in danger. The material of air bag is rubber coated nylon. In order to test air bag smoothness and open easiness, Labthink Instruments Co. Ltd introduces airbag testers as follows:

A. MXD Series of Coefficient of Friction Tester is applicable in static and kinetic coefficient of friction test to plastic film, foils, sheets and paper. Through testing the smoothness of the materials, airbag safety can be guaranteed to meet the demands. This series of products includes MXD-01, MXD-01A and MXD-02.

B. FTP-F1 Friction/Peel Tester: is computer control, and can test the material coefficient of friction between room temperature and 99.9 Centigrade as well as peeling strength of laminated films and adhesive products, which is very important to air bag testing.

3. Automotive Air Bag Tensile Testing and Impact Testing

Automotive air bag receives the signal from the sensor, and turns open within a few seconds so as to protect passenger. Since the open speed to its full is in a limited time of 0.3 seconds so as to resist shock and attack from the outside. Therefore, it is a must for air bag with good tensile performance.

In order to guarantee excellent tensile performance, Labthink Instruments Co. Ltd. introduces new series of tensile and impact testers according to international regulations and standards.

A. Labthink PARAM XLW Series Auto Tensile Testers can test tensile, deformation, tearing, pierce, peeling and other items for films, laminated films and flexible packaging materials, etc. Put the air bag specimen onto the clamps, set the testing speed and start testing.

B. Automotive Air Bag Impact Resistance Testing

At the very moment of air bag opening, it will make a space to release the forward strength of the passenger. Air bag impact performance control can prevent air bag breakage due to low flexibility so as to effectively avoid protection failure of low air bag quality. Usually, impact is tested with falling dart impact tester.

Labthink introduces new BMC-B1 Falling Dart Impact Tester to test air bag impact resistance by falling dart method. It is to test the relevant strength needed to tear the air bag material according to ASTM D 1709, JIS K 7124 and GB 9639, etc. The whole testing process is automatic; testing data are processed by minicomputer.

4. Automotive Air Bag Seal and Leak Testing Instruments

Automotive air bag should be filled instantly by the burning helium when the sensor got the emergency signal. Therefore, automotive air bag integrated seal and leak testing is an important index for automotive air bag quality. Labthink Instruments Co., Ltd. introduces PARAM Leak Tester to test air bag seal and leak performance.

Labthink PARAM MFY-01 Leak Tester determines whether the air bag meets the requirements through observation of emerged air bag in distilled water with inside-out pressure difference. This tester is of simple operation and micro-computer control. It complies with ASTM D3078 and GB/T 15171 and provides accurate data.

5. Automotive Air Bag Peeling Testing Instruments

Automotive air bag is made up of the outer nylon material and the inner rubber. Owing to the long-term storage for emergency, a long period of aging, good peeling resistance strength of the nylon and rubber layers is very important so as to avoid insufficient gas filling caused by rubber layer peeling.

Labthink Instruments Co. Ltd. introduces PARAM XLW series of auto tensile testers so as to meet the testing demand for air bag peeling. This tester is applicable to test tensile, peeling, deformation, tearing and adhesive strength of laminated films and adhesive tapes. PARAM XLW Series Auto Tensile Testers are mini-computer control, and can test multiple data with reliable and accurate results. These testers are equipped with professional software. Also, they are complying with ASTM, ISO, JIS and GB standards.

Labthink Instruments Co., Ltd.

No. 144 Wuyingshan Road, Jinan 250031, China

Tracy Bao info@labthink.cn

Tel: 0086 531 85061153 fax:0086 531 85812140

Labthink, the excellent provider of testing instruments and testing services, is devoted to provide most excellent and complete quality control solutions for pharmaceutical, foodstuff, cosmetics, packaging, printing, adhesive, automotive, petrochemistry, environment, biology, new energy, construction, aviation and electronic industries worldwide.

Labthink is devoted to share excellent quality testing and control techniques with global clients and is known for wide coverage of international testing standards. Labthink participates in the drafting of several important standards of food, pharmaceutical and packaging industries, and is the excellent partner of national certification institutes.

Labthink has also established cooperation with IGT, Rycobel, Metrotec, Chilton, Moroka and other renowned distributors to provide attentive and prompt technical services for her customers in more than 40 countries and regions.

Labthink aims at creating satisfactory value and professional services for her customers.

Labthink, think for you only!
More on articlesbase[dot]com/automotive-articles/automotive-air-bag-testing-instruments-912166.html

Whatever your “dream vacation” is, don’t let it turn into a nightmare because of a breakdown. Have your car inspected by the San Pedro automotive experts before you hit the road to make sure your vehicle is safe for a road trip.

San Pedro Automotive Maintenance – The 40-Point Safety Inspection
An inspection of all of your vehicle’s major systems is critical to keeping you safe on your vacation. That’s why the San Pedro automotive pros provide a comprehensive 40-point safety inspection to avoid problems before they happen. A little maintenance before a trip can prevent a big blowout in the middle of one.

Every San Pedro automotive safety inspection includes a thorough examination of:
Engine system
Battery
Air conditioning health
Fluids
Filters
Brakes
Tires
Alignment
Suspension
Lights
Windshield wipers

The list goes on and on. Your San Pedro automotive maintenance technicians take the time to make sure your vehicle is not only safe, but also operating at its peak performance so you can enjoy your summer road trip without the slightest worry of car trouble.

If you want to do some basic check-ups on your own, don’t forget to:
Check the engine oil and transmission fluid. How long has it been since you had your oil changed or transmission flushed? If you’re not sure, see the San Pedro automotive service professionals to help get you prepared for your trip.
Change the air filter if it hasn’t been changed recently.
Check the power steering fluid, brake fluid, and windshield washer reservoir.
Inspect the tires. Poorly inflated and/or worn tires can quickly ruin your trip. Inflate the tires, including the spare, to the manufacturer’s suggested tire pressure. If your tires show uneven wear, you have an alignment problem that can cause your car to skid at high speeds on the interstate. If you feel any vibration at cruising speed, it’s time to have your tires balanced. In any case, the San Pedro automotive and tire specialists can quickly adjust your alignment or balance your tires.
Check to see whether the jack is in properly working condition in case of a flat tire.
Make sure you have a first aid kit, a flashlight, and extra water.

San Pedro Automotive Maintenance – The First Choice
The San Pedro automotive experts want to be your first choice and your second opinion before you start your summer vacation road trip. Get the 40-point safety inspection to ensure your car is ready for all of the adventures you’ll have. Make an appointment online at www[dot]ParkPlazaAutomotive[dot]com or call 310.831.2888.
More on articlesbase[dot]com/cars-articles/start-your-summer-vacation-safely-with-san-pedro-automotive-maintenance-2769192.html